CNC mechanical chuck solution

Problems encountered by CNC machine manufacturers:

1. When receiving orders for CNC machinery with special requirements, the requirements for speed and tonnage are relatively high, and there are often concerns that the hydraulic system purchased by them cannot meet the requirements of users.

CNC machine solution 2. It is a new hydraulic system. It will not stop when it is turned on at the installation site.

3. Is the hydraulic system extremely noisy?

4. The hydraulic system has a radiator, but the oil temperature is still high?

5. The cost of the hydraulic system is too high and the competition is too great;

6. Does the hydraulic oil pump often seal the oil?

7. Burn the motor often?

8. Hydraulic oil pumps often wear shaft heads and cause them to malfunction.

9. Is the solenoid valve coil burned out?

The solution provided by Taiqin Hydraulics:

Many CNC machine manufacturers from Foshan, Zhejiang, Guangzhou and Jiangmen are using CNC mechanical chuck hydraulic system manufactured by Taiqin Hydraulics; why choose Taiqin?

1. Taiqin Hydraulic has many years of experience in CNC machinery industry, serving a number of CNC machinery manufacturers; rich in technical experience, is the manufacturer of hydraulic systems in CNC machinery industry; Taiqin is equipped with customer service consultants for CNC machinery industry; Find the resonance, and tailor the non-standard hydraulic system hydraulic station according to the actual needs of the customer;

2. According to the company's regulations, every hydraulic system hydraulic station manufactured by Taiqin undergoes three strict tests (ie test pressure, test noise, test sealing performance) and all the test data and handling personnel information are registered and filed; Convenient for future responsibility or customer's second order, can make the parameters and the last time no difference; the purpose of the test is to maintain the public reputation of the company and customers, is to let consumers buy the rest assured, use the peace of mind;

3. Regarding noise; mainly because the oil pump of the purchased hydraulic system has poor sealing performance, which causes the oil pump to absorb excessive air during operation, the working efficiency of the oil pump is abnormally reduced, and abnormal noise is generated; secondly, it is related to the bearing of the oil pump; The oil pump bearing of Qinli Hydraulic Company adopts imported bearings, which makes the oil pump stable operation, stable output and low noise work. The station hydraulics continuously optimizes the oil circuit and reduces the noise generated by the bending impact; it is really responsible for the user's hearing health;

CNC machine solution 4. In the first case, the temperature of the radiator oil is still high. In the final analysis, the hydraulic system design is unreasonable. The station can design a reasonable and scientifically configured hydraulic system according to the user's usage rules and frequency. It is recommended that if the equipment is running continuously for more than eight hours, it is necessary to increase the cooling capacity of the cooler. It is recommended to use the new design oil circuit and the matching circuit requirements to make the motor work scientifically and effectively under the working environment of day and night startup. The new CNC mechanical hydraulic system solution, which is located in the numerical control mechanical equipment, has the characteristics of high efficiency, power saving, fuel saving, automatic, etc. It is suitable for the harsh working environment with long continuous use time; once the product is launched, it has obtained the user's Pursue and trust;

5. The market is mixed, some unscrupulous merchants use refurbished products to enter the market at low prices, seriously undermining the normal order of the market; Taiqin insists that it will not choose cheap, quality components because of the price, because quality is the blood of the station; Taiqin has its own team, and has its own production of hydraulic tanks, oil circuit boards and other components on the hydraulic station. We try our best to reduce our cost while maintaining stable quality, and continuously improve our comprehensive competition for our products. Force and cost performance;

6. The first situation is because the quality of the oil pump itself is not good, the inferior material causes the actual service life of the product to be abnormally shortened; secondly, the hydraulic oil is too dirty, mixed with debris, causing the oil pump unloading hole to be blocked, and the oil pump cannot discharge oil in time. While holding the pressure, exceeding the rated pressure of the shaft seal and leaking oil, the station is very clear, we can not force the user to regularly maintain the hydraulic system, replace the hydraulic oil, clean the hydraulic tank and piping, but the machine will turn the original ∅ The 6-way oil return pipe is upgraded to the ∅10 level at a time, which can reduce the risk that the hydraulic oil contains impurities and may block the oil drain hole and cause the oil pump shaft to seal the oil leakage;

7. Taiqin insists on the use of the national standard 2HP1.5KW pure copper wire motor, which makes the motor run stably, the power is sufficient, eliminates the virtual standard and exaggerates the power; and provides customers with one-year warranty service for the whole machine;

8. At the beginning of the supporting CNC machinery industry, Taiqin often encountered this problem. The motor oil pump worked for a long time, and the oil pump key pin was always easy to be eccentrically damaged, resulting in the hydraulic system not working properly; Qin hydraulic recommended customers to use the combination of spline motor and oil pump, the effect has been recognized by the user, but the customer believes that the cost of the spline is much higher than the ordinary motor oil pump, in order to solve the practical problems of CNC machine manufacturers, The general manager of Taiqin Hydraulic Co., Ltd. took the lead in research and development with the motor manufacturer to introduce a new flat key to enlarge and widen. The shaft is bolded with a 2HP1.5KW motor oil pump combination for numerical control machinery, and the cost is 30% of the original spline. It has been recognized by users, and many old users have purchased new products one after another. The direct reason is that the installation size is the same as the standard size, which is easy to maintain!

9. The reason why the solenoid valve coil is often burnt out is because the hydraulic system is working for a long time; however, this problem has been overcome by the hydraulic system of the station, and the new CNC mechanical hydraulic system after the modification puts the oil circuit and circuit. The optimization adjustment was made again, which reduced the possibility that the solenoid valve coil would burn out; although the cost was increased by 150 yuan/set, the comprehensive service life of the hydraulic system was improved;

10. Understand the station and choose the station; as a hydraulic manufacturer with many years of experience in the hydraulic service of the hydraulic system of the CNC chuck, you are trustworthy and sincerely look forward to cooperating with you;

Services provided by Taiqin Hydraulics:

SK7

●Contact customer service to get specific solution drawings and quotations in 30 minutes;

● Free annual 24-hour hydraulic guidance service;

●Member customers can arrange production delivery first;

●Some orders can be delivered to your door (Foshan District 5 and some cities in the Pearl River Delta)

●Member customers enjoy 15 months of warranty on the manufacturing of the company (one year warranty plus 3 months)

●Members enjoy monthly service;

● Large members enjoy more rights;

1. Supporting hydraulic system of CNC machine manufacturer for many years;

2. The choice and trust of many CNC machinery manufacturers;

3. Taiqin hydraulic team can provide non-standard CNC mechanical hydraulic system solutions;

4. For the working environment of CNC machine is relatively bad, the dustproofing of the hydraulic station has been upgraded. The hydraulic station adopts the design of the lower cover type fuel tank cap, and the sealing glass glue is added at the opening to keep the inside of the fuel tank clean;

5. The stable quality makes the hydraulic system of Taiqin hydraulically sold all over the country;

6. Perfect after-sales team to facilitate timely response and timely resolution;